Ref. |
P/N |
INTERMEDIATE
HOUSING AQ DRIVE UNIT 280T DESCRIPTION |
| 1 | 832682-9 | Interm housing |
| 2 | 897829-8 | ...Gear yoke |
| 3 | 814397-6 | ...Astern lock rod (33) |
| 4 | 897447-9 | ...Shaft |
| 5 | 897511-2 | ...Washer |
| 6 | 17253-6 | ...Cotter |
| 7 | 925259-4 | Rubber ring |
| 8 | 943866-4 | Shim, thickness = 0.1MM |
| - | 943867-2 | Shim, thickness = 0.2MM |
| - | 943868-0 | Shim, thickness = 0.4MM |
| 9 | Fork kit | |
| 10 | 940194-4 | ...Nipple |
| 11 | 814388-5 | ...Bushing |
| 12 | 183391-2 | ...Needle bearing |
| 13 | 181620-6 | ...Seal ring |
| 14 | 832813-0 | ...Bushing |
| 15 | ...Screw | |
| 16 | 832681-1 | ...Trim plate, standard |
| -- | 839248-2 | Trim plate (31), special model |
| 17 | 941807-0 | Screw |
| 18 | 941814-6 | Screw, see Upper Gear Unit AQ Drive Unit 280 and 280T, See Section - 2-K23 |
| 19 | 941885-6 | Nut |
| 20 | 897448-7 | Control rod |
| 21 | 3852328-8 | Control fork |
| 22 | 940190-2 | Nut |
| 23 | 192662-5 | Stud |
| 24 | 17253-6 | Cotter |
| 25 | 814386-9 | Pipe |
| 26 | 941820-3 | 0 ring |
| 27 | 897696-1 | Washer |
| 28 | 941809-6 | Screw |
| 29 | 941808-8 | Screw |
| 30 | 832846-0 | Hose nipple, see group 4A |
| 31 | 814356-2 | Sealing |
| 32 | 941813-8 | Screw |
| 33 | 897644-1 | Pipe |
| 34 | 125017-4 | Seal ring |
| 35 | 897457-8 | Cable attachment |
| 36 | 940168-8 | Screw |
| 37 | 940191-0 | Washer |
| 38 | 832820-5 | Bushing |
| 39 | 804312-7 | Control cube |
| 40 | 940191-0 | Washer |
| 41 | 17276-7 | Cotter |
| 42 | Control cable, see group 9 |